May 20, 2017

Metal Stamping

Evans Metal Stamping, Inc/Evans Tool & Die, Inc

Evans Metal Stamping, Inc/Evans Tool & Die, Inc works to ensure our customer’s complete satisfaction by using advanced technologies, such as: Wire EDM machines, High speed metal stamping and Robotic welding.

Stamping, which is also known as pressing is the process of placing flat sheet metal in either blank or coil form into a stamping press where a tool and die surface forms the metal into a net shape. Stamping includes a variety of sheet-metal forming manufacturing processes, such as punching using a machine press or stamping press, blanking, embossing, bending, and coining. Every stroke of the press produces the desired form on the sheet metal part, or could occur through a series of stages.

  • Bending – the material is deformed or bent along a straight line.
  • Flanging – the material is bent along a curved line.
  • Embossing – the material is stretched into a shallow depression. Used primarily for adding decorative patterns.
  • Blanking – a piece is cut out of a sheet of the material, usually to make a blank for further processing.
  • Coining – a pattern is compressed or squeezed into the material. Traditionally used to make coins.
  • Drawing – the surface area of a blank is stretched into an alternate shape via controlled material flow.
  • Stretching – the surface area of a blank is increased by tension, with no inward movement of the blank edge. Often used to make smooth auto body parts.
  • Ironing – the material is squeezed and reduced in thickness along a vertical wall. Used for beverage cans and ammunition cartridge cases.
  • Reducing/Necking – used to gradually reduce the diameter of the open end of a vessel or tube.
  • Curling – deforming material into a tubular profile. Door hinges are a common example.
  • Hemming – folding an edge over onto itself to add thickness. The edges of automobile doors are usually hemmed.
  • Piercing and cutting can also be performed in stamping presses. Progressive stamping is a combination of the above methods done with a set of dies in a row through which a strip of the material passes one step at a time.

    We also specialize in Tool & Die services.